GTEM 400 – 450 – 450V

The GTEM cell is, in principle, a tapered coaxial line (offset septum plate), which is terminated by a hybrid combination of discrete resistors and RF absorber to achieve a 50 Ohm broadband match. It is applied for the measure of Radiated emissions and radiofrequency field-immunity tests. The GTEMCELL GTEM 400 family consists of the: GTEM-400 is made with 65cm pyramidal carbon-foam absorbers (RAM). GTEM-450 is made with 51cm. EMC Truncated pyramidal absorbers (RAM) GTEM-450V is the vertical model (suffix V) made with 51cm. EMC Truncated pyramidal absorbers (RAM)

Model GTEMCELL GTEM250 F with Ferrite tiles on the bottom offers a wider operating bandwidth with peak smoothed and flat response starting from DC to microwave frequencies. It is an indispensable tool for researchers and developers engineers!

image
image

The standards SAE J1752/3 and IEC 61967-2 define a method for measuring electromagnetic radiation from an integrated circuit (IC). The IC itself is mounted on a test board on a panel that is clamped in the upper face close to the top of the GTEM cell. The test board becomes a part of the cell wall. A receiver or spectrum analyzer measures the RF emissions emanating from the integrated circuit and impressed onto the septum of the cell. The standard IEC 62132-2 defines the immunity test set-up on integrated circuits tested with a GTEM.

The GTEMCELL GTEM250 AF-V is a vertical stand-alone solution for space-saving in the test lab area with a maximized EUT test volume. The GTEM 250AF-V is the ideal TEST CELL FOR ELECTROACOUSTICS -HEARING AIDS according to IEC 60118-13 and others. Many options are available including the XYZ manipulator.

GTEM 450 – GTEM450V Main Technical Specifications / Max EUT Size
Frequency range0,01 MHz – 20GHz*
Septum Height [mm]:450
Max EUT Size (LxWxH)cm35×40×25
Defined test Vol. within 6dB15x15x15 cm.
Typical VSWR1:1,2
Typical VSWR at the critical frequency<1:1,6
Max Input power, W continuous/*pulsed500/*2,5Kw
Input connector7/16″ with an adaptor to N
Nominal impedance50 Ohm
Window in the doorDiam. 200 mm.
 Absorbers Type Truncated pyramidal 51cm.Height
 Shielding effectiveness from 40 to 65dB

 
Mechanical Dimensions
Outer LxWxH [cm]:270×136xH88 + 70cm. Trolley

 

Vertical Model: 923x1372xH2620mm. Trolley included

Door WxH [cm]:.40×60
Weight Kg. Approx190

 
Electrical Specifications
Mains connectorsFix/CEE
Main Switch16A magneto-thermal
Input Socket plug16Aac (Single phase + ground) IEC
Output Socket EUT tape16Aac (Single phase + ground) Schuko
Additional EUT socketsOptional
Ground connectionM6 bolt
AC filter wires (Single PH+Ground)16 Amp. 2 wires
Channel for fiber optic leads3 couples
Secondary AC/DC filter10A 250V AC/DC
RF feed-thru  connectorsN.2  SMA and N.1  N double females

 
Electrical Equipment / Options
AC filter 20A/2 wire (2PH+Ground) AC filter 32A/2 wire (2PH+Ground)
AC filter 16A/4 wires (3PH+N+Ground) AC filter 36A/4 wires (3PH+N+Ground)
Electrical safety interlock 
Indoor lighting 20W LED 
9-poles signal filter (DB9) 
25-poles signal filter (DB25) 
Channel for fiber optic leads (3 couple) Channel for fiber optic leads (6 couple)
Additional RF feed-thru N-type connector 
Additional RF feed-thru SMA type connector 
RJ45 (RJ11) feed-thru connector 
Technical panel pre-drilled for options 
Video camera system

 
Mechanical Equipment / Options
Gas / Water feedthrough plates 
Honeycomb panel 
Fans N.1 12×12cm 
Empty Technical panel 
Wheeled undercarriage