GTEM 2000 – 2100

GTEM 2000 – Main Technical Specifications / Max EUT Size
Frequency range0,01 MHz – 20GHz*
Septum Height [mm]:2000
Max EUT Size (LxWxH)cm150x150x132 cm
Defined test Vol. within 6dB67x67x67 cm
Typical VSWR1:1,2
Typical VSWR at the critical frequency<1:1,6
Max Input power, W continuous/*pulsed1000/*2Kw
Input connectorN or 7/16″
Nominal impedance50 Ohm
Window in the doorDiam.200 mm.
Empty Technical panelN.2 Diam.200 mm.
Mechanical Dimensions
Outer LxWxH [cm]:933×480,5×306
Door WxH [cm]:100×160 clear passage
Weight Kg. Approx.2000
Wheeled undercarriage (Cost Option)25cm high
Electrical Specifications
Mains connectors Fix/CEE
Main Switch 16A magneto-thermal
Input Socket plug IEC 16A(Single phase+ground); 250V Banana plugs 10A 250V
Output Socket EUT tape Schuko 16A (Single phase+ground) 250V Banana plugs 10A 250V
Ground connection M6 bolt
AC filter wires (Single PH+Ground)

AC/DC filter wires
16Amp. 2 wires+ground; 10A, 2 wires
Channel for fiber optic leads 3 couples
RF feed-thru connector No.1 N-N, No.2 SMA-SMA double female type
Indoor LED Light 2x20W
Electrical Equipment / Options
AC filter 30A/2 wire (2PH+Ground)
AC filter 16A/4 wires (3PH+N+Ground)
DC Filter feed-thru 300A 450V
Additional EUT sockets tapes
Electrical safety interlock
9-poles signal filter (DB9)
25-poles signal filter (DB25)
Channel for fiber optic leads (6 couple)
Additional RF feed-thru N or SMA connectors
Input RF connector 7/16″
RJ45 (RJ11) feed-thru connector
Technical panel pre-drilled for options
Video camera system
Mechanical Equipment / Options
Gas / Water feedthrough plates
Honeycomb panel
Larger Door upon request: 160x160cm
Secondary doors: 40x40cm, 60x60cm or 80x80cm
Manipulator