GTEM 2500 – 2600

GTEM 2500 – Main Technical Specifications / Max EUT Size
Frequency range 0,01 MHz – 20GHz*
Septum Height [mm]: 2500
Max EUT Size (LxWxH)cm 200x200x182 cm
Defined test Vol. within 6dB 84x84x84 cm
Typical VSWR 1:1,2
Typical VSWR at the critical frequency <1:1,6
Max Input power, W continuous/*pulsed 2000/*5Kw
Input connector N or 7/16″
Nominal impedance 50 Ohm
Window in the door Diam.200 mm.
Empty Technical panel N.2 Diam.200 mm.
Mechanical Dimensions
Outer LxWxH [cm]:1100x566x361
Door WxH [cm]:100×160
Weight Kg. Approx.2800
Wheeled undercarriage (Cost Option)25cm high
Electrical Specifications
Mains connectorsFix/CEE
Main Switch16A magneto-thermal
Input Socket plugIEC 16A(Single phase+ground); 250V Banana plugs 10A 250V
Output Socket EUT tapeSchuko 16A (Single phase+ground) 250V
Banana plugs 10A 250V
Ground connectionM6 bolt
AC filter wires (Single PH+Ground)

AC/DC filter wires
16Amp. 2 wires+ground; 10A, 2 wires
Channel for fiber optic leads3 couples
RF feed-thru connectorNo.2 N-N, No.2 SMA-SMA double female
Indoor LED Light2x20W
Electrical Equipment / Options
AC filter 30A/2 wire (2PH+Ground)
AC filter 16A/4 wires (3PH+N+Ground)
DC Filter feed-thru 300A 450V
Additional EUT sockets tapes
Electrical safety interlock
9-poles signal filter (DB9)
25-poles signal filter (DB25)
Channel for fiber optic leads (6 couple)
Additional RF feed-thru N or SMA connectors
Input RF connector 7/16″
RJ45 (RJ11) feed-thru connector
Technical panel pre-drilled for options
Video camera system
Mechanical Equipment / Options
Gas / Water feedthrough plates
Honeycomb panel
Larger Door upon request: 160x160cm
Secondary doors: 40x40cm, 60x60cm or 80x80cm